-
-
WS-PEE242L-XD
Gigabit Ethernet Gigabit Fiber Channel Other optical links
Performance Characteristics
Hot Pluggable
Single LC optical interface
1310nm FP transmitter, PIN photo-detector
Low power consumption
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption
Information to be stored in transceiver
Cost effective SFP solution, enables higher port densitiesand greater bandwidth
RoHS compliant (lead free)
Operating case temperature: Commercial:0 to 70 °C Industrial:-40 to 85 °C
WS-PEE242L-xD (1.25G T1310&R1550nm 20km BIDI SFP ).pdf
Parameter | Symbol | Min | Typ | Max | Unit |
Transmitter Electrical Characteristics | |||||
Differential Input Voltage Swing | VIN | 400 | - | 2000 | mV |
Tx Differential Input Impendence | ZIN | - | 100 | - | Ω |
Transmitter Disable Voltage | VDIS | 2.0 | - | VCC+0.3 | V |
Transmitter Enable Voltage | VEN | 0 | - | 0.8 | V |
TFAULT Logic High | VTFH | 2.4 | - | VCC | V |
TFAULT Logic Low | VTFL | VEE | - | VEE+0.4 | V |
Receiver Electrical Characteristics | |||||
Differential output Voltage Swing | VOUT | 400 | - | 1000 | mV |
Rx Differential Output Impendence | ZOUT | - | 100 | - | Ω |
LOS Assert Voltage | VLOSA | 2.4 | - | VCC | V |
LOS De-assert Voltage | VLOSD | VEE | - | VEE+0.4 | V |
Transmitter Characteristics | ||||||
Parameter | Symbol | Min | Typ | Max | Unit | Notes |
Laser Type | FP | |||||
Data Rate | - | - | 1.25 | - | Gb/s | |
Center Wavelength Range | λ | 1260 | 1310 | 1360 | nm | |
RMS Spectral Width | Δλ | - | - | 4 | nm | |
Average Launch power of OFF transmitter | POFF | - | - | -45 | dBm | |
Launch Optical Power | Pout | -8 | - | -2 | dBm | 1 |
Extinction Ratio | ER | 9 | - | - | dB | |
